Amplificateur audio de voiture ALPINE S-A55V 440w RMS 5 canaux série S classe D + absolu achat

• 5-channel Class D Amplifier
• Power Output:
  • 40 watts RMS x 4 + 200 watts RMS x 1 at 4 ohms
  • 60 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
  • 120 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
• CTA-2006 compliant
• Variable high-pass filter (50-400 Hz, 12 dB/octave) on 4-channel section
• Variable low-pass filter (50-400 Hz, 24 dB/octave) on a subchannel
• Variable bass boost (0-12 dB at 50 Hz) on a subchannel
• Optional RUX-KNOB.2 wired remote level control for a subchannel
• Preamp and speaker-level inputs
  • speaker wire to RCA adapter required for speaker-level input
• Wiring and hardware not included with amplifier
  • 4-gauge power and ground leads recommended
• Fuse rating: 30A x 2
• Dimensions: 11-1/4" W x 2-1/4" H x 8" D
• Authorized Dealer
• 1-year Manufacturers Warranty

• 5-Channel amplifier
• Two 30-amp ATO fuses (installed)
• Four 3/4" Screws
• 2mm Allen wrench
• Owners manual (English/ French/ Spanish)
• Alpine Verification Certificate
• Warranty information
• Power supply note
• Online product registration information
• Alpine S-A55V owners manual

Absolute KIT4OR Complete PRO Marine Auto Car RV 4 Gauge 2000 Watts Amplifier Complete Installation Amp Kit Power Wiring with Orange Accent Color Scheme

Installing a car amplifier is already enough of a job without having to worry about where to find the right wire and installation accessories. What you might not know is that there are some gimmicks being played by some companies and you could end up getting ripped off!

Today, I would recommend KIT4 for all DIY and Installer. This is a wiring kit with an easy-to-install AGU fuse holder and some seriously good wiring. The positive and negative power wires are made with copper-coated aluminum (CCA) wiring to keep costs down but remain highly flexible and installer-friendly. The speaker wire kicks ass, and I was not expecting such a high-quality roll of speaker wire to be included. It feels and works great, and it is much better than the typical 18 AWG wire most kits would include.

General Features:

• Complete 4 Gauge Amplifier Kit
• Designed specifically for car audio systems up to 1000 watts
• Premium power and ground wire provide optimal power transfer
• Includes 2-channel RCA interconnect cables for the audio signal connection from the receiver to the amplifier
• Terminals are gold-plated for excellent signal transfer
• For use in any car, truck, RV, or boat
• Authorized Internet Dealer
• 1-year Manufacturers warranty

Package Includes:

• 17 ft. of 4 AWG high current power cable
• 3 ft. of 4 AWG ground cable
• 15 ft. of RCA triple shielded interconnect audio cable with built-in remote wire
• 20 ft. of 12 AWG OFC Speaker cable
• 20 ft. of 16 AWG remote turn-on wire
• 6 ft. of split loom tubing
• 1 Gold plated 80 AMP AGU fuse
• 1 4 AWG gold ring terminal
• 1 4 AWG water-resistant inline fuse holder
• 2 Ring terminals
• 2 Spade terminals (4 gauge)
• 5 Spade terminals (14-16 gauge)
• 3 Self-tapping screws
• 1 Rubber grommet
• 20 Black cable ties
• 2 Butt connectors (18-22 gauge)
• 1 Butt connector (4 gauge)

⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov